NEED A PERFECT PAPER? PLACE YOUR FIRST ORDER AND SAVE 15% USING COUPON:

ITC571 – Emerging Technologies and Innovation

ITC571 – Emerging Technologies and Innovation.

ITC571 – Emerging Technologies and Innovation
Instructions: Please remove all text that is between “ ” and “ ”
Add Project Title here
Subject Coordinator:
Put a picture here if you want to
Name: your name here
Student Number: your student number here
You have previously written a short and brief literature review in the proposal. This comprehensive one is the
literature review that describes and evaluates the research articles you have read in the specific topic of your
interest.
It also includes a critical analysis of the relationship among different works. Therefore, you need to relate
them to your work.
Your Annotated Bibliography should be between 1600 – 2500 words and have the following sections:
Abstract
4/19/2021 [Solved] 64300 – ITC571 – Emerging Technologies and Innovation
https://www.australiabesttutors.com/Recent_Question/64300/ITC571–Emerging-Technologies-and-Innovation-Instructions 3/6
Length: approx. 200 words
Give a brief overview of these document in a paragraph. You need to include the following sections (no
citations):
1. Introduction
2. Summary of the findings in the literature review
Research Questions
Length: 100 – 300 words (You need to use enough citations to support your statements)
What are the major research questions that your project will address? (3 – 6)
Please explain each listed question.
They should be consequent to the research topic and as specific as the topic. It is recommended to avoid very
general questions about the topic technology, technique, or domain.
Literature Review
Length: 200 – 300 words (You need to use enough citations to support your statements). Describe the field of
research and show your reader how you will organise your research (in sections with headings). Write your 6
blocks, using the following guide: [Please do not discuss paper by paper]
1. Think of this as an extended introduction. Organise the 6 reviewed blocks extracting the important
components of your research topic (depending on what is important for you) – you may have noticed
categories some research papers fall into.
• By technology
• By results
• etc.
2. Check all papers to see what you can describe together.
3. Describe the research by
• What did they do?
• How did they do it?
• What technology did they use?
4. Evaluate the contribution the work makes to the field
• Why is this work important?
• How does it differ from other work?
5. Show the limitations of the research
• What did the researchers identify as limitations?
6. Reflect
• What you think you know about this topic now
• What you can identify if those articles have not done something
• The gaps and limitations that are justified for this research
• How the research is valuable for your project (link it to your research questions).
7. Identify relationships among studies in the same group/block:
• Note relationships among studies (i.e. this work achieved higher accuracy than other studies using the
ROTTO algorithm because …).
• Identify important studies (landmark studies) that led to subsequent studies in the same area.
8. Keep your review focused on your topic: make sure that the articles you have found are relevant and
directly related to your topic.
9. If you include tables, diagrams, flowcharts or formulas as part of your review, each of them should be
given a figure/ table number and that number must be cited in the main text with a detailed explanation
(below the figure).
Conclusion
Length: 100 – 200 words (No Citations)
Summarise the key findings from the literature review
References
4/19/2021 [Solved] 64300 – ITC571 – Emerging Technologies and Innovation
https://www.australiabesttutors.com/Recent_Question/64300/ITC571–Emerging-Technologies-and-Innovation-Instructions 4/6
Please note that you need to add all 30-35 references you have collected in your weekly submissions and the
other additional references you are appending for each block. That means you should have a reference list of
more than 30.
Please do the citation of all these papers in the main document (mindful of the comments on referencing
above).
• List the resources in APA 7 style
o Do not forget alphabetical order
o Do not forget the naming style
o Any resource should have a publication year
o Do not forget to manage articles with similar last name of the first author
o Check for any wrong duplicated resources in the list
o Check all references in the list are cited in the text and vice versa
o Check the in-text citations to be in proper format and proper place
• It is recommended to use reference management software
• Check the list before submission. A common problem is incorrect or incomplete bibliographical data.
Appendix A
Start each of your appendices on separate pages; number them with capital letters A, B, C …
Pointers for Success
• Make sure there are no orphaned headers (headings by themselves at the bottom of the page).
• Make sure all pictures have captions under them (See Figure 1).
• Ensure pictures are referred to in the text.
• Ensure all Tables have captions (see Table 1) and ensure they are referred to in your text.
• Ensure all images sources from elsewhere are properly referenced.
• Ensure you use APA 7 referencing style.
• Ensure all work is written in your own words and all ideas are referenced back to the original author.
• NOTE: Please use the “Grammar Check” link in the left side bar in Interact2 to check the grammar of your
final report before submitting it.
• Critical analysis and writing are very important
Sample review group (see below for codes A – H)
Convolution Neural Networks (CNN)
[A] Convolutional neural networks (CNN) have been used to achieve a more fine-grained analysis in a range
of research works. They are generally effective for smaller corpora (Hadad et al., 2016; Colton et al., 2015).
However, processing a large corpus is still computationally expensive due to the high processing time. [B] To
overcome this, Abasir et al. (2017) used CNN to train a Natural Language Processing (NLP) system creating
a RoTT1 algorithm to reduce the training time of a large corpus by several seconds. [C] Lowering training
time is important since it lowers computational cost [D] and even though the improvement was not of
magnitude, no other group of researchers has been able to achieve this. It points to the fact that the RoTT1
algorithm has potential. [E] In addition to the size of the decrease, the researchers identified as limitation that
the overall impact of this reduction is minimal as the data preparation time increased significantly, offsetting
the time gains from training. [F] Despite these issues which require further research, the RoTT1 algorithm
developed by the researchers is still of interest to the proposed work as it has proven to reduce processing
time which is one of the aims of this research. [G] The RoTT1 algorithm has since also been used by other
researchers. An algorithm based on similar principles and CNN were also the basis of an object detection
system by Compten and Wells (2018). However, although this adaptation of RoTT1 is interesting, it is fieldspecific, and the concept may not be suitable for adaptation because the development of a new algorithm is
not the focus of this work. It is, therefore, of no further interest. [H] However, of considerable value for our
work is the research by Blander et al (2019) which focused on [A] compression of corpora by … Blander at a
l (2019) used a multi-layer CNN with the aim adding layers that would sort and condense the corpus
Article adapted for educational purposes from Ho et al. (2018) with permission of the authors.
4/19/2021 [Solved] 64300 – ITC571 – Emerging Technologies and Innovation
https://www.australiabesttutors.com/Recent_Question/64300/ITC571–Emerging-Technologies-and-Innovation-Instructions 5/6
[A] State the special area this paper is based on [get additional references from general research or from the
paper you have reviewed but not used].
[B] Introduce the work you want to discuss and what they did.
[C] Tell your reader why their work is important.
[D] Draw a comparison about this work with existing research.
[E] The limitations the researchers identified themselves.
[F] State why this work is of value to your own research
[G] How has research been used in the field?
[H] Create a link to the next valuable piece of research (i.e. one of the 12) in the same category

ITC571 – Emerging Technologies and Innovation

Solution:

15% off for this assignment.

Our Prices Start at $11.99. As Our First Client, Use Coupon Code GET15 to claim 15% Discount This Month!!

Why US?

100% Confidentiality

Information about customers is confidential and never disclosed to third parties.

Timely Delivery

No missed deadlines – 97% of assignments are completed in time.

Original Writing

We complete all papers from scratch. You can get a plagiarism report.

Money Back

If you are convinced that our writer has not followed your requirements, feel free to ask for a refund.

× Chat on WhatsApp